Xinhang Tower Technology Co.,Ltd

Lattice Tower and Mast in Mongolia

  • Category:Telecom Anglar Tower
  • Rotating Shaft: Both Horizontal and Vertical
  • Power: According to Client′s Technical Specification Certification: ISO
  • Trademark: MEGATRO
  • Rotating Shaft: Both Horizontal and Vertical
  • Product Manual:As one of the leading supplier of steel tower, Xinhang Tower Technology could manufacture various kinds of towers according to customers' drawings or requirement. Lattice tower and mast is one feature

  • Rotating Shaft: Both Horizontal and Vertical

  • Power: According to Client′s Technical Specification

  • Certification: ISO

  • Trademark: MEGATRO

  • Origin: Shandong, China

  • Number of Blade: Three Blade

  • Stress Way of Blade: Resistance

  • Phase: According to Client′s Technical Specification

  • We Can Design by Pls & Tower Software: According to Client Desing or Requirement

  • Specification: AS PER CLIENT

  • HS Code: 8502310000

Product Description

Lattice wind tower and mast
MEGATRO is a full service engineering company with a global reputation for delivering excellence and innovation in telecommunications systems.
Over 10 years of experience and innovation in engineering, designing and building towers has evolved MEGATRO into its current form:
l        Full Turn-Key provider including site acquisition, engineering services, manufacturing,   field services-DAS, tech services, value added reseller and monitoring, maintenance and network ownership
l        Specialize in developing supplying and building wireless and wired networks and in-building telecommunications systems, as well as energy infrastructure
l        Single source from Design to System Integration
l        Top quality, ISO 9001 registered
A complete selection of towers including self-support, lattice steel tower, monopoles and Guyed Towers, form custom-designed radar towers to broadcast towers and energy infrastructure. MEGATRO carries a variety of related Products including fall protection, transmission lines, antennas, obstruction lights, and accessories, and other products if client need, MEGATRO also tailored product as per client condition.

MEGATRO mainly design all kinds of towers and posts for:
a.      Telecoms
b.      Power transmission
c.      TV and Radio Broadcast
d.      Roads and City Development
e.      Wind energy

Our complete selection of towers includes:
a.      Self-supporting
b.      Monopoles
c.      Guyed towers
d.      Custom-designed radar towers
e.      Broadcast towers
f.        Power transmission

MEGATRO also designs and manufactures tower related products including:
a.      Fall protection
b.      Antenna brackets
c.      Other accessories if needed by clients

This photo refers to our lattice wind tower and mast, this tower mainly being steel framework or supports for wind generator, with technical data as follow:
Available in heights of 3 to 80m, even special design as per client
Designed for different wind speed and terrains
Designed for light, medium and heavy loads of wind generator and blade with wind scope
Lower freight cost due to freight efficiency
Available with a large variety of accessories that can be easily mounted at any stage
Enables easy reinforcement of legs at the site
Modular design to fit a specific site design and enable last-minute modifications
Four legs or three legs shape
Material combined type
(1)   Main legs and bracing: all angle steels
(2)   Main legs and bracing: all pipe structures
(3)   Main legs: pipe and bracing angle steels

Main support structure:
Wind generator
Horizontal or vertical blade
Obstruction lighting system (ICAO standards)
Lightning protection kit

Optimal Height: 3 to 80m

Design Standards: GB, or BS8100, EUROCODE 3 PART 3-1

Legs Q345B, or ASTM A572 GR50, or ST 52-3, or S355JR
Braces and plates Q235B, or ASTM A36, or S235, Or ST 37-2
Bolts: Chinese grade 6.8 and 8.8, which similar to ASTM A394

A) Dimension and tolerance for angle are according to GB/T1591-1994, similar to EN 10056-1/2
B) Hot dip galvanization in accordance with GB/T 13912-2002, which similar to ASTM A 123
C) The welding will be performance in accordance with AWS D1.1 or CWB standard

Bolts (ISO 8.8, SAE Grade 5, or ASTM A-325) + flat washers, nuts and spring
washers (5% hardware overage)
Anti-Corrosion Treatment:
All steel elements are hot-dip galvanized (ASTM A123)
Paint kit (white/orange)
Anchor rods (ASTM F1554) used with leveling nuts and a positioning template

For this lattice wind tower and mast, Our MEGATRO performs in-house design activities by PLS software or other software. Our Engineering Department is boasting of highly qualified engineering who are conversant with international codes and standards. The work is carried out with extensive use of CAE/CAD via a large of computer network. The computer hardware & drafting software are liked to the CNC workshop Equipment for downloading of information thereby eliminating error and saving valuable production time.

After fabrication all towers are delivered to the galvanizing facility to be Hot Dip Galvanized. Towers are processed through the facility by Caustic Cleaning, Pickling, and then Fluxing. These strict procedures insure years of maintenance free towers.

Moreover, we offer cost effective range of development and installation service regarding as an additional installation service. These are further, designed for both government and civil communications and suitable for both far-off and short distance communications. For additional protection, we cover these with protective shield to prevent the radioactive fallouts.

Other information:
Availability size: Based on the customer's requirements.
Material: Chinese material or as per clients requirement
Package: Both parties discuss before delivery
Port of Loading: Qingdao Port
Lead Time: One month or based on the customer's needs
Minimum order: 1 set

Fabrication standard: Chinese Standard or other standard which client accepted

All towers manufactured and design shall be generally in accordance with latest revision of the following standards except where specifically directed otherwise.
IEC 60050 (151)                         International Electro-technical Vocabulary
Part 51 Electrical and Magnetic Devices
IEC 60050 (601)                      Chapter 601: Generation, transmission and distribution of electricity-General
IEC 60050 (601)                    Chapter 601: Generation, transmission and distribution of electricity-Operation
IEC 60059                              IEC standard current ratings
Chinese Standard






Power Transmission line Steel tower - Technical requirements for manufacturing



Technical specification for welding for steel structure of building



Measuring and allowable tolerance for hot-rolled equal angle



Measuring and allowable tolerance for hot-rolled plate and strip



Quality Carbon Structural Steel



Low alloy high strength structural Steel



Carbon Structural Steel



Method of sampling steel for determination of chemical composition and permissible variations



Method for Tensile testing of metals



Method for Bending test of metals



Carbon Welding Rod



Low Alloy Welding Rod



Welding wires for gas shielding arc welding of carbon and low alloy steels



Carbon steel flux cored electrodes for arc welding



Weld outer dimensions for steel construction



Test Standard for Acceptance of Steel Structure



Zinc Ingot



Mechanical properties of fasteners-Part 1:Bolts, screws and studs



Mechanical properties of fasteners-Part2: Nuts, and thread



Mechanical properties of fasteners-Part3: Fastening screw



Helical Bolts Grade C



Helical Nuts Grade C



Flat Washer Grade C



Metal Coating, Technical Requirement and Test Method for Hot-dip galvanized Metal Parts

American Standards:

Standard Description
ASTM A6/A6M Standard specification for general requirements for rolled structural steel bars, plates, and sheet piling.
ASTM - 6 -  General Requirements for delivery of Rolled Steel Plates, Shapes, sheet Piling Bars for  structural used
ASTM A36/A36-M-97a Standard specification for Carbon structural steel
ASTM A123 / A123M-02 Standard specification for Zinc (Hot-Dip Galvanized) Coatings on iron and steel products
ASTM A143 / A143M-03 Standard Practise for Safeguarding Against Embitterment of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embitterment
ASTM A153/ A153M-05 Standard specification for zinc coating (Hot-Dip) on iron and steel hardware
ASTM A - 194 -   Grade for bolt
ASTM A239 Standard practice for locating the thinnest spot in a zinc (Galvanized) Coating on Iron or Steel Articles
ASTM A242 Standard specification for High-Strength Low-Alloy Structural steel
ASTM A307 Standard Specification for Carbon Steel Bolts and Studs, 60000 PSI Tensile strength
ASTM A370-06 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
ASTM A325 Standard Specification for structural bolts, steel, Heat treated 120/105 ksi minimum tensile strength
ASTM A-325 or A-354 -  Galvanized hexagonal head of  connection bolt
ASTM A325-97 Standard Specification for High-strength Bolts for structural steel Joints
ASTM A384 / A384M-02 Standard Practise for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies.
ASTM A394-93 Standard Specification for steel Transmission Tower, Bolts, Zinc Coated and Bare
ASTMA - 563 -    Class and size of nuts
ASTMA - 572 - Chemical composition of steel
ASTM A572/A572-97c Standard specification for High-Strength Low-Alloy Columbium-Vanadium Structural steel
ASTMA - 615 -   The anchor bolt material
ASTM A673 / A673M-07 Standard Specification for Sampling Procedure for Impact  Testing of Structural Steel
ASTM B201 Standard practice for testing Chromatic coating on Zinc and Cadmium surfaces
ASTM  E94-93 Standard Guide for Radiographic Testing
ASTM E 709-95 Standard Guide for Magnetic Particle Examination
ASCE Manual 72 -  Load testing a simple structure
ASCE 10-97 Standard Design of latticed steel transmission structures
AWS D1.1 American Welding Society D1,1/D1,1M structural Welding code- Steel
ANSI B-182-2 Bolts, nuts and washers dimensions

DIN VDE 0101                       -  Isokeraunic Level
VDE 0201                              - Climatic and environmental   conditions
CVDE 0210                           -  Minimum safety factors under    simultaneous working loads
ISO R898 Mechanical Properties of Fasteners
BS EN ISO 1461:1991 - High dip galvanized coatings on fabricated iron and steel articles. Specifications and standards
A) BS 5950: Welding Terms And Symbols
B) BS 729: Hot - Dip Galvanised Coating On Iron And Steel Articles
C) BS 2901: Filler Rods And Wires For Gas Shielded Arc Welding: Part 1 Ferritic Steels
D) BS 3692: ISO Metric Precision Hexagon Bolts, Screws And Nuts
E) BS 4360: Weldable Structural Steel
F ) BS 5135: Metal - Arc Welding Of Carbon And Carbon Manganese Steel
G) BS 5950: Part 1: Code Of Practice For Loading Latticed Tower & Masts
Part 2: Guide To The Background And Use Of Part 1"Code OF Practice For Loading"
Part 3: Strength Assessment of Members
H) DD 133 (1986): Code Of Practice For Loading Latticed Tower & Masts
I) BS 4592 (1987): Part 2: Specification For Expanded Metal Grating Panels
J) BS 4592 (1977): Code Of Practice For Protective Coating Of Iron And Steel Structure Against Corrosion
K) BS 4190: Bracing & Flanged Bolts
L) BS 4190: Rolled Steel sections, Flats & Plates

If any special requirement, we can design and discuss with client.

PREVIOUS:30 Meter Telecom Cell Monopole Tower
NEXT:Iron Hot-dip Galvanized Communication Lattice Guyed Mast

Online Inquiry

Deutsch Espanol Francais Italiano Portugues Japanese Korean Arabic Russian